Get end-to-end through hole PCB assembly (THA) from prototypes to production. At Michael Electronics, we are committed to delivery of high-end technology solutions. To this end, we offer a complete range of through hole PCB assembly capabilities resulting in PCBs that are in compliance with international quality standards.


We are fully equipped to handle the following through-hole PCB assembly services:

  • PCB Assembly
  • Cable assembly
  • Electromechanical assembly
  • Contract design
  • Testing
  • Prototyping
  • Aftermarket services
  • Laser ID Marking on PCBs
  • Conformal coating
  • Repair and revision upgrading
  • Burn-in and thermal cycling

Some of what you see here is industry-standard, while other offerings are more niche or specialty. Either way, here are a few thoughts on EMS companies:

  • Working with a company who has a dedicated engineering staff is super valuable.
  • Make sure your vendor has the industry-specific certifications you need. A medical company, for example, might need a specific certification that a gas meter company does not.

Here's what to expect with EMS:


This is used to discover the temperature profile that works best for the through hole PCB and to point out defects such as Insufficient solder, misaligned components, marginal joints and more.

This is used to discover the temperature profile that works best for the through hole PCB and to point out defects such as Insufficient solder, misaligned components, marginal joints and more.

  • Analog and digital contract PCB design
  • Schematic capture and contract PCB layout
  • RF design and site assessment
  • Intrinsically safe power, barriers, & systems
  • Enclosure design & 3D modeling
  • Power switching circuits & drive
  • Breadboarding, prototypes, & simulation
  • DFX & DFM analysis
  • Validation
    • Environmental compliance
    • CE precertification assessment
    • Custom test fixtures & procedures
    • HALF (Highly accelerated life testing)
    • DFMEA (design failure modes & effects analysis)
    • Electromagnetic immunity & emissions compliance

OEMs should expect support with product development that meets ISO 9001, ISO 13485, and AS 9100 standards.


The range of through hole PCB assembly comes with a varied benefits including:

Through-hole takes a little longer because it involves more human interaction with the board. Surface-mount technology is more advanced but is the standard for most modern products.

Advanced electronics manufacturers can also turn aged through-hole products into more modern SMT-designed products to maximize the lifespan and useability of their life. This is thanks to state-of-the-art machinery that’s improved both speed and accuracy.

Circuit board parts are so small, you don’t necessarily know you’re building it wrong until you test it. Luckily, the complete electronics manufacturer will offer full functional in-house testing services. More on that below.

To Get Free Quote click me


Custom cable and mechanical assembly can also be a one-stop experience when working with state-of-the-art electronics manufacturers. Specializing in harsh environment cables, an experienced ECM should be capable of producing reliable cables for mining, medical, instrumentation, and other fields.

With a certified quality management system, your contract electronics manufacturer should be able to engineer, test, and produce quality cable assemblies ranging from micro push-pull connectors to harnesses and complex mechanical subassemblies.

There’s more than just cable assembly to these services. Other products associated with these services include:

  • Harsh-environment cable assemblies
  • Harnesses
  • Control panels/boxes
  • Mechanical subassemblies
  • Panel wiring and assembly

Little surprise then, that even though surface mount components allow for denser configurations, for larger and heavier components that require strong bonds, through-hole technology has remained resilient and relevant.

For cable assemblies, manufacturing is done with hand soldering -- your vendor should be certified in this. Many can also have injection over-molding capabilities. This refers to a process in which a single part is created using multiple materials. Typically the first material (sometimes called the substrate) is at least partially covered by subsequent materials (over-molds) during manufacturing.

Does your vendor offer custom over-molding capabilities? It’s something worth checking out before you buy.

Time to test? Cables can receive a functional test and a pull test. The testing process doesn’t need to be as rigorous as with PCB assemblies.

Forms of these tests include automated cable testing, and continuity and “hipot” testing. “Hipot” is short for high potential, which in turn means high voltage. A hipot test is the opposite of a continuity test in that it makes sure no current will flow from one point to another.


These services refer to products such as box builds. Depending on the manufacturer, these enclosures come:

  • Steel
  • Aluminium
  • Plastic

A robust electronics manufacturers may have a dedicated final assembly team for these services.

A vendor can also offer

  • Custom shipment packaging
  • Functional testing
  • Configuration management
  • Encapsulation
  • 3-D modeling
  • Potting and heat shrink use

Configuration management is a means of establishing consistency in your product’s performance and look. Potting is the process of filling a finished assembly with goo-like stuff to improve moisture, vibration, shock, and corrosion resistance. Heat shrink is a shrinkable plastic tubing that goes over the cable. So you’re literally getting another layer -- ranging from paper-thin to industrial-sized -- of abrasion protection for your product, whether it goes in a mine or another dangerous place.

All electromechanical assembly work should be done with intrinsic safety in mind -- both in the design stage and the manufacturing process.


Sometimes you need an expert, and that expert does not exist inside your building. That’s OK.

Contracting out design lets you take advantage of industry-specific, expert engineers and production teams. They will generate:

  • Software and firmware
  • Validation tests
  • DFX analysis (design for manufacturability, testability, cost-effectiveness)
  • Environmental tests for compliance

The vendor should be doing this while providing documentation to you every step of the way and meeting regulatory approval.

But EMS can really shine when a vendor jumps all-in on the product development process. That means getting involved before the product design actually takes place.

Electronics manufacturing services should include the engineers, material manager, and others helping refine a contracted design through:

  • Circuit simulation and prototyping
  • Testing
  • Costing exercises
  • 3-D CAD and physical modeling
  • Technical feasibility modeling
  • Quality review

Did “costing exercises” catch your eye? You can come to a vendor with your price problems -- it may be able to find substitute components that are less expensive. All without lowering final product quality!


Before that shipment of circuit boards arrives on your doorstep, you want to be sure you’re getting what you paid for -- a properly assembled, fully functional board. Anything less can compromise your supply chain.

Failing to commit PCB testing can

  • Hamper lead times
  • Cost extra money to fix issues
  • Harm the reputation of your product and company

The ways your electronics contract manufacturer can test a PCB assembly are staggering. Manufacturers’ offerings range from a visual inspection (basic) all the way up to a functional test (allows for a turnkey operation)

Types of PCB testing include, but are not limited to:

  • Flying probe testing
  • In-circuit testing(ICT)
  • Burn-in testing
  • Automated opticl inspection(AOI)
  • Other functional testing

If you opt for extensive testing before you receive your product, you’ll know it was built to your specifications. Most importantly, you’ll know whether your product needs additional testing or it’s ready to send off to your own customers.


Messing up an electronic device rollout can be painfully expensive. PCB prototyping can help you avoid an embarrassing situation when you head to launch.

Many of the justifications for prototyping are obvious, but not all of them:

  • Design fault checks: An expert ECM can easily detect technical and human faults. It can then recommend improvements before you finalize your design.
  • Product durability:In the real world, your product often has to withstand at least one of the following: temperature variations, power variations, shock resistivity.
  • Protecting your budget:Is your product intended for the masses rather than a niche market? A redo is going to be especially costly. Once the final PCB design heads to mass production, there’ no “rewind” button.
  • Confirmation for production:Overall product design and packaging depend on the PCB’s design and size. Prototyping will solidify these attributes.
  • Product characteristics inspecting:Sometimes, the practical values of the product are a shade off the theoretical values considered in the design stage. Prototypes can help you check and update these values.

PCB prototyping services often takes one of these four forms. As you go down the list, the build gets more "complete":

  • Visual model
  • Proof of concept
  • Working prototype
  • Functional prototype

Your ECM’s commitment to customer satisfaction must continue long after product delivery.

Check for three qualities in an electronics aftermarket services provider: experience, expertise and technology. For example, Matric Group keeps the customer’s supply chain going with product upgrades, calibration, and repair services handled by state-of-the-art equipment run by skilled technicians.

Regardless of where your industrial or consumer was made or what it was made for, your electronics manufacturing services provider should have the know-how to service it properly.

  • Calibration
  • Refurbishing
  • Remanufacturing
  • Automated system simulation
  • Burn-in
  • Component-level trouble shoooting
  • Electrical & electromechanical
Products Serviced
  • Underground mining electronics
  • Industrial cabling
  • RF handhelds & base stations
  • Single-board computers
  • Consumer electronics
  • Distributed control systems
  • Displays & HMI devices
Additional Capabilities
  • Cleaning
  • High-pressure spray washer
  • Low-temperature drying oven
  • Sandblasting
  • Proprietary cable-cleaning machine (cleans any length in seconds)
  • Two-sets-of-eyes inspections
  • Thermal testing
  • Painting facility
  • Conformal coating
  • Repair analysis by part number, product group, or by customer
  • Bringing units back to OEM specifications

This can include work on products manufactured by another company and on legacy products that require sustaining engineering.

Some service providers can even help you get ahead of the issues with failure analysis. If the same repair is being done repeatedly, a provider may jump in and quote a redesign that will save you money in the long run.


Obsolescence is a similar issue in electronics manufacturing. When a part is nearing the end of its life, your supplier can quote you for new supplies so you’re not caught unprepared.

There are three possible recommendations the provider will offer:

  • End-of-life -- the part is no longer useful and no longer supported
  • Last time buy -- a final bulk purchase before the maker discontinues the part
  • Not recommended for new design -- The future of the part is uncertain, outdated, or carries risk of becoming obsolete.

To help manage component obsolescence, a vendor should offer life-cycle analysis. This assessment looks at the total environmental impacts of a component through its entire life. Before you even finish production, your vendor can proactively look for parts that will need replaced and help you them obtain alternatives.

So, despite the term “aftermarket,” some of these services can benefit you before customers see your end result. You should always be aware of the risks before you send a product to market!


This is just a beginning overview of electronic contract manufacturing services. As you can see, what you get varies greatly by vendor. Some are simply looking to print bare boards in huge volumes. Others offer complex, creative solutions in smaller volumes and assist with several steps of the supply chain.

Surprised how much the right electronics contract manufacturer can do? Don’t be -- there are reasons the best electronics manufacturers offer all-in-one services:

  • Full understanding of your project and goals (and fewer miscommunications)
  • More invested in its success
  • Fewer shipping and transportation costs and delays


  • Providing turnkey PCB assembly services means that the provider will handle all the task including components or parts procurement, manufacturing, assembly and final delivery!
  • Absolutely. Our state-of-the-art facilities are fully equipped to handle high volume PCB orders. In addition, we have a team of PCB experts that has a lot of experience in catering to high volume PCB production.
  • We offer extensive range of electromechanical assembly including electromechanical cable assemblies, box builds, subassemblies, front panel assemblies, simple enclosure assemblies, din rail assemblies, power supply assemblies and more.
  • Space Aerospace
  • Defense & military
  • Telecommunication
  • Medical
  • Renewable
  • Yes, we offer conformal coating services. For more information, please contact us at
  • As a leading manufacturer, we regularly providing electromechanical assembly services in various industrial sectors including aerospace, consumer electronics, manufacturing, LED, automotive, Defense, medical, telecommunication and more.
  • ISO 9001-2015
  • ISO 13485-2016
  • AS9100 Rev D
  • ANAB Accredited
  • RoHS
  • IPC
  • As a leading manufacturer, we regularly providing electromechanical assembly services in various industrial sectors including aerospace, consumer electronics, manufacturing, LED, automotive, Defense, medical, telecommunication and more.
  • As a leading manufacturer, we regularly providing electromechanical assembly services in various industrial sectors including aerospace, consumer electronics, manufacturing, LED, automotive, Defense, medical, telecommunication and more.
  • Our standard turnaround time is 2-3 business days; Although it is depending on material availability, complexity, quality and quantity of requirements! Get in touch with us to know more!